查看“模板:Yocto qt”的源代码

===QT 开发环境的搭建===
====SDK安装====
:*下载工具链“fsl-imx-xwayland-glibc-x86_64-imx-image-full-aarch64-toolchain-4.19-warrior.sh”[http://norcord.com:8070/f/39998b1f237647719406/ 下载地址]<br />
:*[[imx8SDK安装方法]]
====配置qtcreat====
*修改qtcreat.sh启动脚本
*在开头加上如下命令
<syntaxhighlight lang="bash">
. /opt/fsl-imx-xwayland/4.19-warrior/environment-setup-aarch64-poky-linux
</syntaxhighlight>
*运行 QT creator,在 Qt 运行界面下,菜单栏点击 “Tools –> Options –> Build&Run”,进行相关配置。
a.设置 “Compiler” :<br />
:点击 Add -> GCC -> gcc ,添加一个 gcc,Compiler path 一栏填写 :
<syntaxhighlight lang="bash">
/opt/fsl-imx-xwayland/4.19-warrior/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux-gcc
</syntaxhighlight>
:点击 Add -> GCC -> g++ ,添加一个 g++,Compiler path 一栏填写 :
<syntaxhighlight lang="bash">
/opt/fsl-imx-xwayland/4.19-warrior/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux-g++
</syntaxhighlight>
b.设置 “QT Versions” :<br />
:点击 Add ,点击 Browser,选择 qmake location 为:
<syntaxhighlight lang="bash">
/opt/fsl-imx-xwayland/4.19-warrior/sysroots/x86_64-pokysdk-linux/usr/bin/qmake
</syntaxhighlight>
:确认aplay
c.设置 “Debuggers”:<br />
:添加一个“ Manual” ,点击 Add,点击 Browser,Path 为 :
<syntaxhighlight lang="bash">
/opt/fsl-imx-xwayland/4.19-warrior/sysroots/x86_64-pokysdk-linux/usr/bin/aarch64-poky-linux/aarch64-poky-linux-gdb
</syntaxhighlight>
d.设置“ Kit”
:添加一个“ Manual” ,点击 Add,点击 Browser,选择 Sysroot 为:/opt/fsl-imx-xwayland/4.19-warrior/sysroots/aarch64-poky-linux
:Compiler 一栏,选择配置好的 gcc 和 g++
:Debugger 一栏,选择配置好的 gdb
:然后点击 apply