查看“模板:Vga resolution”的源代码

<!--
{| class="wikitable"
|-
! 名称 !! 分辩率
|-
| SXGA || 800x600
|-
| XGA || 1024x768
|-
| VGA768a || 1280x768
|-
| VGA768b || 1280x768
|-
| LCD720P || 1280x768
|-
| LCD800 || 1280x800
|-
| LCD960 || 1280x960
|-
| LCD1024 || 1280x1024
|-
| LCD768 || 1366x768
|-
| LCD1024 || 1440x900
|-
| LCD1080P || 1920x1080
|-
| LCD-1080I50 || 1920x1080
|-
| LCD-1080I60 || 1920x1080
|}
-->
:{| class="wikitable" width="100%" 
|-
! scope="row" width="5%" | 名称 
| width="5%" align="left" | SXGA
| width="5%" align="left" |XGA
| width="5%" align="left" |VGA768a
| width="5%" align="left" |VGA768b
| width="5%" align="left" |LCD720P
| width="5%" align="left" |LCD800
| width="5%" align="left" |LCD960
| width="5%" align="left" |LCD1024
| width="5%" align="left" |LCD768
| width="5%" align="left" |LCD1024
| width="5%" align="left" |LCD1080P
| width="5%" align="left" |LCD-1080I50
| width="5%" align="left" |LCD-1080I60
|-
! scope="row" |分辩率
| 800x600
| 1024x768
| 1280x768
| 1280x768
| 1280x768
| 1280x800
| 1280x960
| 1280x1024
| 1366x768
| 1440x900
| 1920x1080
| 1920x1080
| 1920x1080
|}

:* 示例：把1280x768分辨率的LCD显示改为800x600分辨率
:::<syntaxhighlight lang="bash" line>

root@sabresd_6dq:/ # cat /proc/cmdline                                      
console=ttymxc0,115200 init=/init vmalloc=400M androidboot.console=ttymxc0 androidboot.hardware=freescale fb0base=0x27b00000 video=mxcfb0:dev=lcd,LCD720P,if=RGB24,bpp=32 video=mxcfb1:dev=hdmi,1280x1024M@60,bpp=32 video=mxcfb2:offfbmem=28M,28M
root@sabresd_6dq:/ # fw_setenv bootargs "console=ttymxc0,115200 init=/init vmalloc=400M androidboot.console=ttymxc0 androidboot.hardware=freescale fb0base=0x27b00000 video=mxcfb0:dev=lcd,SXGA,if=RGB24,bpp=32 video=mxcfb1:dev=hdmi,1280x1024M@60,bpp=32 video=mxcfb2:off fbmem=28M,28M"
root@sabresd_6dq:/ # reboot
</syntaxhighlight>
::shell 说明：
::::1、获取系统启动参数。
::::2、由步骤1得到的启动参数（启动参数中dev=lcd节点后的 <font color="red">LCD720P</font>名称即是表格中的1280x768分辨率，修改分辨率只需 <font color="red">替换</font>成上表格中应有的名称即可！这里我们举例替换为<font color="red">SXGA</font>）。
::::3、设置环境变量（fw_setenv [-a key] [variable name] [variable value]  ,variable name : bootargs，variable value ： “已修改后的步骤2中的启动参数”）。
::::4、重新启动。